sales@anandscientific.com Phone: +91-9899199946, 9899633313
Stability-Test-Walk-In-Chambers

Stability Chamber

Pre Installation Mandatory Requirement :
(Guarantee void in case of non compliance)

a) Distilled water OR DM water continuous supply with tap for boiler input of ‘/2 BSP at 3 feet height

b) Room temperature around machine preferably at 25C with air conditioning or a well ventilated room with exhaust fan. However surrounding temperature should not exceed 30C

c) Stabilized input voltage of230V AC 20 Amps. Use of servo controlled stabilizer is
recommended

d) Water drain line with ‘/2″ nozzle to be provided at floor level

GMP Model

– Outer cabinet SS 304 grade dull matt finish

– Inner chamber stainless steel mirror ?nish
– With DQ. IQ. OQ documentation

Cu ft WxDxH mm SS

4 112 455 x 410 x 610mm 2
6.1 171 505 X 415 X 830 2
l0 230 570 x 550 x 875 3
12 336 650 x sxo x 900 3
15 420 700 x 640 x 900 4

Optional Extras Accessories

a) PLC based system PLC with HMI 3.7 touch screen grey monitor with 21 CFR Pan 11 features (OSLONG) software

b) Magnetic door lock feature

c) GSM system alarm sent to predefined mobile numbers.

d) Digital PID controller with printer interface to connect EPSON Dot matrix line printer. Print interval programmable can print date. time. Temperature.

e) PC interface for above controller with software on CD & hardware or software with 21 CFR part 11 features.

f) lmported RH sensor European make, Rotronic Switzerland for higher accuracy

g) Standby humidity system

h) Standby refrigeration system

i) Data logger: 4 point temp. 9 4 point humidity data logger with sensors placed at speci?c points in chamber with printer interface
and memory of S000 readings per channel

Enquiry

Reviews

There are no reviews yet.

Be the first to review “Stability Chamber”

Your email address will not be published. Required fields are marked *